Shenzhen Goldsuno Opto-electronic Techonology Co. Ltd

Three Installation Methods for LED Panel Lights

Sep. 12, 2018

LED panel light

1. Ceiling type: first, make a few screw holes on the top of the ceiling. then, fix the 3 sides of the ceiling light of the panel light to the top of the wall, and confirm that the screws are firm. then, slide the panel light into the vacant surface of the fixed slide-in ceiling frame. and finally, fix the fourth side to the frame with screws. this process is convenient, simple and saves time.

2. Embedded type: first, install the sheet metal slot on the ceiling. then, fix a few protruding brackets on the back of the LED panel light. then, put the panel light into the bracket to match the sheet metal slot on the ceiling, you can fix on the ceiling. however, due to the different thickness of the ceiling, it is necessary to adjust the height between the lamp surface and the bracket. otherwise, the LED panel light will be higher or lower than the ceiling surface after being installed.

3. Hanging type: firstly, drill the mounting hole on the ceiling, fix the lifting fittings, lock the screw hanging line vertically, and suspend the components on the back of the LED panel light. it is easy to install and save. consumers must pay attention to ask to know the suspension component is the manufacturer's standard accessories or options.

If you want to buy LED panel lights, please contact us.


Copyright © Shenzhen Goldsuno Opto-electronic Techonology Co. Ltd. All Rights Reserved | Sitemap | Powered by
susan123925
christina_liu_01